Flush-mounted time-controlled 2000W electronic toggle relay module for Radio Power system, with neutral wire

The MTR2000ERP flush-mounted radio module is a timed step-by-step electronic relay, which allows the management of lights or automations up to a maximum of 2000W.
Thanks to its potential-free contact, it can control any device up to 2000W (eg light, aspirator, irrigation ...) that requires a clean contact.
The behavior of the relay can be customized, among the following: impulse mode (e.g. electric lock), monostable mode (e.g. bell), flashing light mode (application for the deaf and hard of hearing) or staircase lights timer mode.
It includes double timings: a main one from 2 seconds to 4 hours, with switch-off warning, and a prolonged one (12 hours).
The MTR2000ERP module is hybrid, and therefore can be commanded in a wired way, either by means of a button or switch connected directly, and in radio mode, by means of Yokis transmitters.
Similarly, it is possible to centralize multiple MTR2000ERP modules to allow total switching on or off, both via the pilot wire and via the Yokis Radio Bus.
If the system includes the Yokis Hub, the module can also be managed via the YnO App, both locally and remotely, and can be managed in automatic mode by defining scenarios.
Programming the module is very simple: either through a directly connected button or through the YokisPRO Installer application.
Accessories:
R12M (code 5454073): Interface for double button (not interlocked).
D600V (code 5454072): diode for centralizing the modules via pilot wire.