DIN rail time-controlled 2000W electronic toggle relay module for wired system, with neutral wire

The MTR2000M DIN rail module is a timed wire step-by-step electronic relay, which allows the management of lights or automations up to a maximum of 2000W.
Thanks to its potential-free contact, it can control any device up to 2000W (eg light, aspirator, irrigation ...) that requires a clean contact.
It includes double timings: the main one from 2 seconds to 4 hours and the prolonged one (1 hour), with switch-off warning.
integrates the daily scheduling function of two actuations (ignition
and shutdown) automatic at scheduled times.
it is possible to centralize multiple MTR2000E modules via the pilot wire and the R12M accessory (code 5454073), to allow total switching on or off.
Thanks to the “soft start / soft stop” function, it limits the inrush current during the lighting phase of the light circuit, thus increasing the life of the lamp and the buttons.
The module provides 2 types of integrated electronic protections: in case of short circuit on the load (with automatic reset after elimination of the fault) and against overheating.
It also allows control via a low voltage button (12 or 48 V), both in direct and alternating, with the addition of the ADBT accessory
Network noise immunity up to 1.5 kV
Increases the useful life of bulbs and buttons
Accessories:
ADBT (code 5454076): 12-48V AC or DC low voltage adapter.
R12M (code 5454073): Interface for double button (not interlocked).
D600V (code 5454072): Diode for centralizing the modules via pilot wire