Timed electronic dimmer module, 500W, Radio Power system, flush-mounted, with neutral

The MTV500ERP flush-mounted radio module is a timed electronic dimmer, which allows the management of the brightness variation from 3% to 100% on loads up to 500W, with the principle of variation by interruption at the beginning or at the end of the phase, with recognition automatic load type: it is compatible with different loads, including, incandescent lamps, 230V LED and dimmable halogen.
The MTV500ERP dimmer module can be centralized via the Yokis Radio Bus.
It supports the management of multiple dimming levels, which can be recalled with short presses: 1 press for 100% lighting, 2 presses to recall the last brightness level, 3 presses for 50% lighting, 4 presses to recall the minimum brightness level (preset).
The module can be timed, from 2 seconds to 4 hours, with shutdown notice and an extended duration, which extends the timing up to 12 hours. It also features the courtesy night light function for children which allows for a light intensity of 20% which will decrease in an hour until leaving only a courtesy light (for 12 hours). It also allows you to activate the luminous signals of corridors or other rooms for night travel.
The module can be programmed to function as a simple step-by-step relay or for application for the deaf and hard of hearing, using the light for visual signaling.
Thanks to the “soft start / soft stop” function, it limits the inrush current during the lighting phase of the light circuit, thus increasing the life of the lamp and the buttons.
The module provides 2 types of integrated electronic protections: in case of short circuit on the load (with automatic reset after elimination of the fault) and against overheating. it is also immune to mains disturbances up to 1.5 kV.
If the system includes the Yokis Hub, the module can also be managed via the YnO App, both locally and remotely, and can be managed in automatic mode by defining scenarios.
Programming the module is very simple: either through a directly connected button or through the YokisPRO Installer application.
Accessories:
SMARTCHR (code 5454089): Resistive load for energy saving and LED bulbs