Are you an End User?
Products > Smart Home > Kit > Radio diverter kit for light control or automation, Radio Power system
PDF Product SheetPrint

Radio diverter kit for light control or automation, Radio Power system

5454521

Radio diverter kit for light control or automation, Radio Power system
Radio diverter kit for light control or automation, Radio Power system

Radio diverter kit for light control or automation, Radio Power system

5454521

  • Product specification:
  • MTR2000ERP
  • ✦
    Mains voltage 230 V ~ (± 15%) - 50 Hz
  • ✦
    Power: on resistive load 10 A - 250 VAC, max. 2500 VA; other loads 10 A - 30 VDC max 300W
  • ✦
    Consumption <1 VA - <0.3W
  • ✦
    Ambient temp. - 20 ° C + 60 ° C
  • ✦
    Sound level <60 dB at 20 cm
  • ✦
    Relative humidity from 0 to 70%
  • ✦
    Range: in the same room <100 m2; 250 m in a free and unobstructed field of view (Reduction of the radio range in the presence of metal elements, crossing walls or bulkheads)
  • ✦
    Frequency: 2.4GHz
  • ✦
    Transmission: Bidirectional with notification LED on the transmitter (If the LED does not flash it is not a malfunction of the batteries, but it means that the radio transmission was unsuccessful) It keeps data in the event of a power failure
  • ✦
    Dimensions 48 x 33 x 22.5 mm

  • E2BPP
  • ✦
    Range: in the same room <100 m2; 250 m in an unobstructed and unobstructed field of vision (reduction of range in the presence of metallic elements, crossing of walls or bulkheads)
  • ✦
    Frequency: 2.4GHz
  • ✦
    Transmission: Bidirectional with notification LED on the transmitter (If the LED does not flash it is not a battery malfunction, but it means that the radio transmission was unsuccessful)
  • ✦
    Battery: CR2032 lithium type
  • ✦
    Average battery life: 5 years (The battery is replaced by opening the container with a flat screwdriver)
  • ✦
    Max number of receivers per channel: in direct mode 4; in unlimited "" Radio Bus "" mode
  • ✦
    Operating temperature -10 ° C +50 ° C
  • ✦
    IP54 protection
  • ✦
    Maximum relative humidity 70%
  • ✦
    Dimensions 40 x 28.5 x 11.5 mm

The RADIO VVP kit allows you to control a light point in diverter mode: the 2-channel transmitters allow you to switch on / off the same light point, connected to the MTR2000ERP step-by-step relay, by two separate buttons.
Thanks to the radio transmission of the modules in the kit, no modifications to the electrical system or building works are required.
Kit contents:
- n. 1 cod. 5454462 - Timed electronic step by step relay module, 2000W, Radio Power system, flush-mounted, with neutral
- n. 2 cod. 5454427 - Transmitter with 4 independent channels, Radio Power system, flush-mounted

Product Booklets

Installation

INSTALLATION MANUAL (radio transmitter) - it,en,fr,es,de,nl,da

DS1054-063B • pdf 1.70 MB • ID: 609504

INSTALLATION MANUAL (relay module) - it,en,fr,es,de,nl,da

DS1054-012H • pdf 1.18 MB • ID: 609444

Programming

RADIO QUICK INSTALLATION GUIDE - en

DS1054-102A • pdf 5.03 MB • ID: 490628

  • ✦
    Packaging quantity single: 1
  • ✦
    EAN single: 3760054545212
  • ✦
    Base: 100 mm
  • ✦
    Height: 70 mm
  • ✦
    Depth: 100 mm